kubeadm v1.18.2 с Crio версии 1.18.2 не может запустить главный узел из частного репо на Centos7 / RH7

Описание

Я относительно новичок в кубернетах. Я могу запустить свой кластер при использовании сокета по умолчанию (/var/run/dockershim.sock), но когда я попробовал сокет crio для извлечения изображений из моего частного репо, я заметил, что скорость даже близко не сравнивается.

Я пытаюсь настроить все свои узлы на использование crio.socket, но мне не удается запустить главный узел с этим сокетом.

Я следил за документацией из кубернетов. Настройка каждого кублета в вашем кластере с помощью kubeadm, а также за документацией по git cri-o.

К сожалению, я не могу заставить его работать, поскольку, похоже, он игнорирует флаг частного репо.

Шаги по воспроизведению проблемы:

  1. Запустите главный узел (основной) с помощью следующего init (используя частное репо):
kubeadm init \
        --upload-certs \
        --cri-socket=/var/run/crio/crio.sock \ 
        --node-name=my_node_name \
        --image-repository=my.private.repo \
        --pod-network-cidr=10.96.0.0/16 \
        --kubernetes-version=v1.18.2 \
        --control-plane-endpoint=ip:6443 \
        --apiserver-cert-extra-sans=ip \
        --apiserver-advertise-address=ip
  1. Запускаем как root или с sudo: journalctl -xeu crio -f
  2. Посмотрите в режиме отладки или информации образец журналов ниже

Опишите полученные результаты:

Пример логов из crio в режиме отладки:

Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043499089+02:00" level=debug msg="Trying to access \"k8s.gcr.io/pause:3.2\"" file="docker/docker_image_src.go:68"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043547722+02:00" level=debug msg="Credentials not found" file="config/config.go:123"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043576124+02:00" level=debug msg="Using registries.d directory /etc/containers/registries.d for sigstore configuration" file="docker/lookaside.go:51"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043706369+02:00" level=debug msg=" Using \"default-docker\" configuration" file="docker/lookaside.go:169"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043736378+02:00" level=debug msg=" No signature storage configuration found for k8s.gcr.io/pause:3.2" file="docker/lookaside.go:174"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043769424+02:00" level=debug msg="Looking for TLS certificates and private keys in /etc/docker/certs.d/k8s.gcr.io" file="tlsclientconfig/tlsclientconfig.go:21"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.043858410+02:00" level=debug msg="GET https://k8s.gcr.io/v2/" file="docker/docker_client.go:516"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.046154250+02:00" level=debug msg="Ping https://k8s.gcr.io/v2/ err Get \"https://k8s.gcr.io/v2/\": dial tcp 10.254.3.15:443: connect: connection refused (&url.Error{Op:\"Get\", URL:\"https://k8s.gcr.io/v2/\", Err:(*net.OpError)(0xc00084d5e0)})" file="docker/docker_client.go:708"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.046239456+02:00" level=debug msg="GET https://k8s.gcr.io/v1/_ping" file="docker/docker_client.go:516"
Jun 30 20:03:45 hostname crio[6693]: time="2020-06-30 20:03:45.048653448+02:00" level=debug msg="Ping https://k8s.gcr.io/v1/_ping err Get \"https://k8s.gcr.io/v1/_ping\": dial tcp 10.254.3.15:443: connect: connection refused (&url.Error{Op:\"Get\", URL:\"https://k8s.gcr.io/v1/_ping\", Err:(*net.OpError)(0xc0006b0690)})" file="docker/docker_client.go:735"

Опишите ожидаемые результаты:

Запуск узла с использованием крио сокета

Дополнительная информация, которую вы считаете важной (например, проблема возникает только изредка):

Если я запускаю узел, используя сокет по умолчанию, например:

# kubeadm init \
        --upload-certs \
        --cri-socket=/var/run/dockershim.sock \ 
        --node-name=my_node_name \
        --image-repository=my.private.repo \
        --pod-network-cidr=10.96.0.0/16 \
        --kubernetes-version=v1.18.2 \
        --control-plane-endpoint=ip:6443 \
        --apiserver-cert-extra-sans=ip \
        --apiserver-advertise-address=ip
W0630 20:24:33.223266   29033 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
[init] Using Kubernetes version: v1.18.2
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk
[certs] Using existing apiserver-kubelet-client certificate and key on disk
[certs] Using existing front-proxy-ca certificate authority
[certs] Using existing front-proxy-client certificate and key on disk
[certs] Using existing etcd/ca certificate authority
[certs] Using existing etcd/server certificate and key on disk
[certs] Using existing etcd/peer certificate and key on disk
[certs] Using existing etcd/healthcheck-client certificate and key on disk
[certs] Using existing apiserver-etcd-client certificate and key on disk
[certs] Using the existing "sa" key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/admin.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/scheduler.conf"
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
W0630 20:24:35.839949   29033 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[control-plane] Creating static Pod manifest for "kube-scheduler"
W0630 20:24:35.841420   29033 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 11.003647 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.18" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
key
[mark-control-plane] Marking the node hostname as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node hostname as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: token
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join ip:6443 --token token \
    --discovery-token-ca-cert-hash sha256:hash \
    --control-plane --certificate-key key

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join ip:6443 --token token \
    --discovery-token-ca-cert-hash sha256:hash

Если я запускаю узел с крио сокетом:

# kubeadm init \
        --upload-certs \
        --cri-socket=/var/run/crio/crio.sock \ 
        --node-name=my_node_name \
        --image-repository=my.private.repo \
        --pod-network-cidr=10.96.0.0/16 \
        --kubernetes-version=v1.18.2 \
        --control-plane-endpoint=ip:6443 \
        --apiserver-cert-extra-sans=ip \
        --apiserver-advertise-address=ip
W0630 20:32:33.827957    2916 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
[init] Using Kubernetes version: v1.18.2
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [hostname kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.96.134.57 10.96.134.57 10.96.134.57]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [hostname localhost] and IPs [10.96.134.57 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [hostname localhost] and IPs [10.96.134.57 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
W0630 20:32:37.829806    2916 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[control-plane] Creating static Pod manifest for "kube-scheduler"
W0630 20:32:37.830826    2916 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp [::1]:10248: connect: connection refused.
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp [::1]:10248: connect: connection refused.
Unfortunately, an error has occurred:
                timed out waiting for the condition

        This error is likely caused by:
                - The kubelet is not running
                - The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)

        If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
                - 'systemctl status kubelet'
                - 'journalctl -xeu kubelet'

        Additionally, a control plane component may have crashed or exited when started by the container runtime.
        To troubleshoot, list all containers using your preferred container runtimes CLI.

        Here is one example how you may list all Kubernetes containers running in cri-o/containerd using crictl:
                - 'crictl --runtime-endpoint /var/run/crio/crio.sock ps -a | grep kube | grep -v pause'
                Once you have found the failing container, you can inspect its logs with:
                - 'crictl --runtime-endpoint /var/run/crio/crio.sock logs CONTAINERID'

error execution phase wait-control-plane: couldn't initialize a Kubernetes cluster
To see the stack trace of this error execute with --v=5 or higher

Я вижу, что localhost прослушивает порт 10248:

# curl -sSL http://localhost:10248/healthz
ok

Пример крио сокета (как описано в документации):

# curl -v --unix-socket /var/run/crio/crio.sock http://localhost/info | jq
* About to connect() to localhost port 80 (#0)
*   Trying /var/run/crio/crio.sock...
* Failed to set TCP_KEEPIDLE on fd 3
* Failed to set TCP_KEEPINTVL on fd 3
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0* Connected to localhost (/var/run/crio/crio.sock) port 80 (#0)
> GET /info HTTP/1.1
> User-Agent: curl/7.29.0
> Host: localhost
> Accept: */*
>
< HTTP/1.1 200 OK
< Content-Type: application/json
< Date: Tue, 30 Jun 2020 18:36:35 GMT
< Content-Length: 240
<
{ [data not shown]
100   240  100   240    0     0   144k      0 --:--:-- --:--:-- --:--:--  234k
* Connection #0 to host localhost left intact
{
  "storage_driver": "overlay2",
  "storage_root": "/var/lib/containers/storage",
  "cgroup_driver": "systemd",
  "default_id_mappings": {
    "uids": [
      {
        "container_id": 0,
        "host_id": 0,
        "size": 4294967295
      }
    ],
    "gids": [
      {
        "container_id": 0,
        "host_id": 0,
        "size": 4294967295
      }
    ]
  }
}

Выход kubelet status

# systemctl status kubelet -l
● kubelet.service - kubelet: The Kubernetes Node Agent
   Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled)
  Drop-In: /usr/lib/systemd/system/kubelet.service.d
           └─10-kubeadm.conf
   Active: active (running) since Tue 2020-06-30 20:39:49 CEST; 6s ago
     Docs: https://kubernetes.io/docs/
 Main PID: 8502 (kubelet)
    Tasks: 15
   Memory: 20.1M
   CGroup: /system.slice/kubelet.service
           └─8502 /usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf --config=/var/lib/kubelet/config.yaml --container-runtime=remote --container-runtime-endpoint=/var/run/crio/crio.sock --hostname-override=hostname

Jun 30 20:39:55 hostname kubelet[8502]: I0630 20:39:55.369441    8502 kubelet_node_status.go:294] Setting node annotation to enable volume controller attach/detach
Jun 30 20:39:55 hostname kubelet[8502]: I0630 20:39:55.399015    8502 kubelet_node_status.go:70] Attempting to register node hostname
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.403707    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.503871    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.604115    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.704324    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.769448    8502 kubelet_node_status.go:92] Unable to register node "hostname" with API server: Post https://ip:6443/api/v1/nodes: dial tcp ip:6443: connect: connection refused
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.805779    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:55 hostname kubelet[8502]: E0630 20:39:55.906014    8502 kubelet.go:2267] node "hostname" not found
Jun 30 20:39:56 hostname kubelet[8502]: E0630 20:39:56.007272    8502 kubelet.go:2267] node "hostname" not found

Из того немногого, что я знаю, сетевые ошибки не имеют отношения к делу, поскольку я еще не запустил сетевой контейнер, поэтому ошибки ожидаются на этом этапе.

Выход crio --version:

# crio --version
crio version 1.18.2
Version:       1.18.2
GitCommit:     7f261aeebffed079b4475dde8b9d602b01973d33
GitTreeState:  clean
BuildDate:     2020-06-18T21:05:27Z
GoVersion:     go1.14
Compiler:      gc
Platform:      linux/amd64
Linkmode:      static

Выход kubelet --version:

# kubelet --version
Kubernetes v1.18.2

Выход LinuxOS version:

# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.8 (Maipo)

Дополнительные сведения о среде (AWS, VirtualBox, физическая и т. Д.):

Установка применяется на barebone-узле.

образец файла kubelet

# cat /etc/default/kubelet
KUBELET_EXTRA_ARGS=--feature-gates="AllAlpha=false,RunAsGroup=true" --container-runtime=remote --cgroup-driver=systemd --container-runtime-endpoint='unix:///var/run/crio/crio.sock' --runtime-request-timeout=5m

Обновление: я поднял заявку в github Kubernetes v1.18.2 с крио версии 1.18.2, которая не может синхронизироваться с kubelet на RH7 #3915. Похоже, что это ошибка, поскольку cri-o не может обработать удаленный репозиторий и пытается вытащить репо по умолчанию k8s.io. Я обновлю билет, как только у меня появится дополнительная информация.

1 ответ

Решение

Так что проблема не совсем в ошибке CRI-O как мы изначально думали (также CRI-O dev team), но кажется, что нужно применить множество конфигураций, если пользователь желает использовать CRI-O как CRI за kubernetes а также желание использовать закрытое репо.

Поэтому я не буду помещать здесь конфигурации для CRI-O, поскольку они уже задокументированы в билете, который я поднял с командой Kubernetes v1.18.2 с крио версии 1.18.2, которая не может синхронизироваться с kubelet на RH7#3915.

Первая конфигурация, которую кто-то должен применить, - это настроить реестры контейнеров, в которые будут извлекаться образы:

$ cat /etc/containers/registries.conf
[[registry]]
prefix = "k8s.gcr.io"
insecure = false
blocked = false
location = "k8s.gcr.io"

[[registry.mirror]]
location = "my.private.repo"

CRI-O рекомендует передавать эту конфигурацию в качестве флага в kubelet (haircommander / cri-o-kubeadm), но для меня она не работала только с этой конфигурацией.

Я вернулся к руководству kubernetes, и рекомендуется не передавать там флаг для kubelet, а в файл /var/lib/kubelet/config.yamlво время выполнения. Для меня это невозможно, поскольку узел должен запускаться с сокета CRI-O, а не с любого другого сокета (см. Настроить драйвер cgroup, используемый kubelet на узле плоскости управления).

Итак, мне удалось запустить его, передав этот флаг в моем примере файла конфигурации ниже:

$ cat /tmp/config.yaml
apiVersion: kubeadm.k8s.io/v1beta2
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 1.2.3.4
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///var/run/crio/crio.sock
  name: node.name
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
controlPlaneEndpoint: 1.2.3.4:6443
imageRepository: my.private.repo
kind: ClusterConfiguration
kubernetesVersion: v1.18.2
networking:
  dnsDomain: cluster.local
  podSubnet: 10.85.0.0/16
  serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
cgroupDriver: systemd

Затем пользователь может просто запустить главный / рабочий узел с флагом --config <file.yml> и узел будет успешно запущен.

Надеюсь, вся информация здесь поможет кому-то другому.

Другие вопросы по тегам