xrp {"result":{"error":"noNetwork","error_code":17,"error_message": "Не синхронизировано с сетью Ripple.","request":{"command":"fee"},"status ":"ошибка"}}
Я пытаюсь запустить не валидаторный узел с волнами. Я использую экземпляр класса C5 RAM 32 ГБ в aws с внешним томом - хранилище io1 с 10000 iops. У меня была перезагрузка узла для исправления, и с тех пор все в порядке, но возвращается
curl --data-binary '{"метод": "плата","параметры": []}' -H 'тип-содержимого: текст / простой;' http://:5005/ Нормальный ответ похож на:
{"result":{"current_ledger_size":"68","current_queue_size":"0","drops":{"base_fee":"10","median_fee":"5000","minimum_fee":"10","open_ledger_fee":"10"},"expected_ledger_size":"150","ledger_current_index":51375387,"levels":{"median_level":"128000","minimum_level":"256","open_ledger_level":"256","reference_level":"256"},"max_queue_size":"3000","status":"success"}}
ошибка;
{"result":{"error":"noNetwork","error_code":17,"error_message":"Not synced to Ripple network.","request":{"command":"fee"},"status":"error"}}
После перезагрузки я получаю сообщение об ошибке "Не синхронизировано".
Когда я запускаю новый узел, он должен загрузить 95 ГБ данных примерно за 1 день, и пока я жду, он получает ту же ошибку.
Мне интересно, что мне нужно сделать, чтобы эти узлы оставались стабильными.
[server]
port_rpc_admin_local
port_peer
port_ws_admin_local
#port_ws_public
#ssl_key = /etc/ssl/private/server.key
#ssl_cert = /etc/ssl/certs/server.crt
[port_rpc_admin_local]
port = 5005
ip = 0.0.0.0
admin = 127.0.0.1
protocol = http
[port_peer]
port = 51235
ip = 0.0.0.0
# alternatively, to accept connections on IPv4 + IPv6, use:
#ip = ::
protocol = peer
[port_ws_admin_local]
port = 6006
ip = 0.0.0.0
admin = 127.0.0.1
protocol = ws
#[port_ws_public]
#port = 6005
#ip = 0.0.0.0
#protocol = wss
#-------------------------------------------------------------------------------
[node_size]
huge
# This is primary persistent datastore for rippled. This includes transaction
# metadata, account states, and ledger headers. Helpful information can be
# found here: https://ripple.com/wiki/NodeBackEnd
# delete old ledgers while maintaining at least 2000. Do not require an
# external administrative command to initiate deletion.
[node_db]
type=RocksDB
path=/data01/rippled/db/rocksdb
open_files=2000
filter_bits=12
cache_mb=256
file_size_mb=8
file_size_mult=2
online_delete=120000
advisory_delete=0
# This is the persistent datastore for shards. It is important for the health
# of the ripple network that rippled operators shard as much as practical.
# NuDB requires SSD storage. Helpful information can be found here
# https://ripple.com/build/history-sharding
#[shard_db]
#path=/data01/rippled/db/shards/nudb
#max_size_gb=500
[database_path]
/data01/rippled/db
# This needs to be an absolute directory reference, not a relative one.
# Modify this value as required.
[debug_logfile]
/var/log/rippled/debug.log
[sntp_servers]
time.windows.com
time.apple.com
time.nist.gov
pool.ntp.org
# To use the XRP test network (see https://ripple.com/build/xrp-test-net/),
# use the following [ips] section:
# [ips]
# r.altnet.rippletest.net 51235
# File containing trusted validator keys or validator list publishers.
# Unless an absolute path is specified, it will be considered relative to the
# folder in which the rippled.cfg file is located.
[validators_file]
validators.txt
# Turn down default logging to save disk space in the long run.
# Valid values here are trace, debug, info, warning, error, and fatal
[rpc_startup]
{ "command": "log_level", "severity": "warning" }
# If ssl_verify is 1, certificates will be validated.
# To allow the use of self-signed certificates for development or internal use,
# set to ssl_verify to 0.
[ssl_verify]
1
Это моя команда запуска:
/opt/ripple/bin/rippled --silent --conf /etc/opt/ripple/rippled.cfg
1 ответ
Я запустил C5.xlarge с объемом памяти io1 со скоростью 10000 iops.
/opt/ripple/bin/rippled --net --silent --conf /etc/opt/ripple/rippled.cfg
[server]
port_rpc_admin_local
port_peer
port_ws_admin_local
#port_ws_public
#ssl_key = /etc/ssl/private/server.key
#ssl_cert = /etc/ssl/certs/server.crt
[port_rpc_admin_local]
port = 5005
ip = 0.0.0.0
admin = 127.0.0.1
protocol = http
[port_peer]
port = 51235
ip = 0.0.0.0
# alternatively, to accept connections on IPv4 + IPv6, use:
#ip = ::
protocol = peer
[port_ws_admin_local]
port = 6006
ip = 0.0.0.0
admin = 127.0.0.1
protocol = ws
#[port_ws_public]
#port = 6005
#ip = 0.0.0.0
#protocol = wss
#-------------------------------------------------------------------------------
[node_size]
medium
# This is primary persistent datastore for rippled. This includes transaction
# metadata, account states, and ledger headers. Helpful information can be
# found here: https://ripple.com/wiki/NodeBackEnd
# delete old ledgers while maintaining at least 2000. Do not require an
# external administrative command to initiate deletion.
[node_db]
type=RocksDB
path=/data01/rippled/db/rocksdb
open_files=2000
filter_bits=12
cache_mb=256
file_size_mb=8
file_size_mult=2
online_delete=120000
advisory_delete=0
# This is the persistent datastore for shards. It is important for the health
# of the ripple network that rippled operators shard as much as practical.
# NuDB requires SSD storage. Helpful information can be found here
# https://ripple.com/build/history-sharding
#[shard_db]
#path=/data01/rippled/db/shards/nudb
#max_size_gb=500
[database_path]
/data01/rippled/db
# This needs to be an absolute directory reference, not a relative one.
# Modify this value as required.
[debug_logfile]
/var/log/rippled/debug.log
[sntp_servers]
time.windows.com
time.apple.com
time.nist.gov
pool.ntp.org
# To use the XRP test network (see https://ripple.com/build/xrp-test-net/),
# use the following [ips] section:
# [ips]
# r.altnet.rippletest.net 51235
# File containing trusted validator keys or validator list publishers.
# Unless an absolute path is specified, it will be considered relative to the
# folder in which the rippled.cfg file is located.
[validators_file]
validators.txt
# Turn down default logging to save disk space in the long run.
# Valid values here are trace, debug, info, warning, error, and fatal
[rpc_startup]
{ "command": "log_level", "severity": "warning" }
# If ssl_verify is 1, certificates will be validated.
# To allow the use of self-signed certificates for development or internal use,
# set to ssl_verify to 0.
[ssl_verify]
1
/etc/init.d/rippled
#
# rippled -- startup script for rippled
#
# chkconfig: - 85 15
# processname: rippled
#
### BEGIN INIT INFO
# Provides: rippled
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs $remote_fs $network
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop rippled
### END INIT INFO
#
#
#PIDFILE="/data01/bitcoin/bitcoind.pid"
start() {
echo -n "Starting rippled: "
exec /opt/ripple/bin/rippled --net --conf /etc/opt/ripple/rippled.cfg "$@"
}
stop() {
echo "shutting down rippled"
exec /opt/ripple/bin/rippled stop"
RETVAL=$?
rm $PIDFILE
[ $RETVAL -eq 0 ] && rm -f $PIDFILE
return $RETVAL
}
force_start() {
echo -n "Force starting Bitcoind: "
echo -n "Starting rippled: "
exec /opt/ripple/bin/rippled --net --conf /etc/opt/ripple/rippled.cfg "$@"
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
stop
sleep 30
start
;;
force-start)
force_start
;;
*)
echo "Usage: {start|stop|restart|force-start}"
exit 1
;;
esac
exit $?```