Ручные сгибы кода vim продолжают двигаться
Я предпочитаю делать мой код сворачивается вручную. Тем не менее, я заметил, что складки двигаются после того, как я
- Сделать складку, используя
zf - Сделайте некоторые удаления / вставки после / под сгибом кода
Складки "двигаются" в том смысле, что если сложить 51 линию, то после перемещения складывается только 50 линий. Это делает так, что часть сложенного кода больше не находится в сгибе и теперь просто выглядит как случайно размещенный фрагмент кода. Мне часто приходится удалять перемещенные сгибы и делать повторные складки.
Любые идеи о том, как это исправить? Пожалуйста, дайте мне знать, если это не имеет никакого смысла или если вы не можете повторить это поведение.
set nocompatible " required
filetype off " required
" ================================================================="
" ================================================================="
" ==================== Begin my added plugins ====================="
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
Plugin 'VundleVim/Vundle.vim'
Plugin 'vim-syntastic/syntastic'
Plugin 'luochen1990/rainbow'
Plugin 'godlygeek/tabular'
Plugin 'garbas/vim-snipmate'
Plugin 'MarcWeber/vim-addon-mw-utils'
Plugin 'tomtom/tlib_vim'
Plugin 'honza/vim-snippets'
Plugin 'aperezdc/vim-template'
Plugin 'tpope/tpope-vim-abolish'
Plugin 'Raimondi/delimitMate'
Plugin 'tpope/vim-repeat'
call vundle#end()
filetype plugin indent on
" ================================================================="
" ================================================================="
" ===================== End my added plugins ======================"
if v:lang =~ "utf8$" || v:lang =~ "UTF-8$"
set fileencodings=ucs-bom,utf-8,latin1
endif
set bs=indent,eol,start " allow backspacing over everything in insert mode
set ai " always set autoindenting on
set viminfo='20,\"50 " read/write a .viminfo file, don't store more than 50 lines of registers
set history=50 " keep 50 lines of command line history
set ruler " show the cursor position all the time
" Only do this part when compiled with support for autocommands
if has("autocmd")
augroup fedora
autocmd!
" In text files, always limit the width of text to 78 characters
" autocmd BufRead *.txt set tw=78
" When editing a file, always jump to the last cursor position
autocmd BufReadPost *
\ if line("'\"") > 0 && line ("'\"") <= line("$") |
\ exe "normal! g'\"" |
\ endif
" don't write swapfile on most commonly used directories for NFS mounts or USB sticks
autocmd BufNewFile,BufReadPre /media/*,/run/media/*,/mnt/* set directory=~/tmp,/var/tmp,/tmp
" start with spec file template
autocmd BufNewFile *.spec 0r /usr/share/vim/vimfiles/template.spec
" auto-source the vimrc upon writing to the file
autocmd bufwritepost vimrc source %
augroup END
endif
if has("cscope") && filereadable("/usr/bin/cscope")
set csprg=/usr/bin/cscope
set csto=0
set cst
set nocsverb
" add any database in current directory
if filereadable("cscope.out")
cs add $PWD/cscope.out
" else add database pointed to by environment
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set csverb
endif
syntax enable
" ================================================================="
" ================================================================="
" ============== Begin additions for Syntastic plugin ============="
let &shellpipe = '2>&1| tee'
let &shellredir = '>%s 2>&1'
set statusline+=%#warningmsg#
set statusline+=%{SyntasticStatuslineFlag()}
set statusline+=%*
let g:syntastic_always_populate_loc_list = 1
let g:syntastic_auto_loc_list = 1
let g:syntastic_check_on_open = 1
let g:syntastic_enable_signs=1
let g:syntastic_check_on_wq = 0
"let g:syntastic_auto_loc_list = 2
"let g:syntastic_check_on_open = 1
"let g:syntastic_check_on_wq = 0
"let g:syntastic_enable_balloons = 0
"let g:syntastic_error_symbol = '✗'
"let g:syntastic_ignore_files = ['\.min\.js$', '\.min\.css$']
"let g:syntastic_loc_list_height = 5
"let g:syntastic_warning_symbol = '✗'
"let g:syntastic_style_error_symbol = '∆'
"let g:syntastic_style_warning_symbol = '∆'
" shortcut command for toggling syntastic mode (useful for when I'm just writing test code)
fun! s:toggle_syntastic()
call SyntasticToggleMode()
endfun
command! STM :call s:toggle_syntastic()
" ================================================================="
" ================================================================="
" =========== Begin additions for Rainbow_parens plugin ==========="
" set to zero and use :RainbowToggle to switch between modes
let g:rainbow_active = 1
" ================================================================="
" ================================================================="
" =========== Begin additions for Tabular plugin ==========="
vnoremap ;t :Tabularize /
" ================================================================="
" ================================================================="
" =========== Begin additions for SnipMate plugin ==========="
let g:snippet_version = 1
" ================================================================="
" ================================================================="
" ============== Begin additions for Templates plugin ============="
" see :h template.txt
" let g:templates_user_variables = [
" \ ['FULLPATH', 'GetFullPath'],
" \ ]
"
" function! GetFullPath()
" return expand('%:p')
" endfunction
" ================================================================="
" ================================================================="
" ================== Begin my 'set' vimrc things =================="
" Show (partial) command in status line
set showcmd
" Do case insensitive matching, smart case matching, don't wrap back to the top after searching
set ignorecase
set smartcase
set nowrapscan
set incsearch
" Automatically save before commands like :make
set autowrite
" Hide buffers when they are abandoned
set hidden
" set tab length, indentation length, auto indent
set tabstop=4
set shiftwidth=4
set autoindent
" disable swap file generation
set noswapfile
" change the orientation of the windows when using :split and :vs
set splitbelow
set splitright
" save state of original code folds, don't open code folds when doing searches
autocmd BufWinLeave *.* mkview
autocmd BufWinEnter *.* silent loadview
set foldopen-=search
set viewoptions=folds,cursor
" auto comments for /* (javadoc style comments)
set comments=sl:/*,mb:\ *,elx:\ */
" lets the tags file to be in a separate directory from the source code
" basically does the following:
" goes up one directory at a time until it finds a file called '.tags'
set tags=.tags;/
" set manual fold method, min number of lines to make a fold = 1
set fdm=manual
set fml=1
" fold method based on file syntax
" fold level = 2 for .java = 1 for .c
" min fold level = 0 for folding single lines
"set fdm=syntax
"set fml=0
"if &filetype == 'java'
" set fdn=2
"elseif &filetype == 'c'
" set fdn=1
"endif
" searches down into subfolders
" provides tab-completion for all file-related tasks
set path+=**
" display all matching files when you tab-complete
set wildmenu
" tweaks for file browsing
let g:netrw_browse_split=4 " open in prior window
let g:netrw_altv=1 " open splits to the right
let g:netrw_liststyle=3 " tree view
" set matching parenthesis/brace/bracket to be underlined
hi MatchParen cterm=underline ctermbg=none ctermfg=none
" make the vim tab bar look prettier
hi TabLineFill ctermfg=Black ctermbg=Black
hi TabLine ctermfg=Blue ctermbg=Black
hi TabLineSel ctermfg=Black ctermbg=Yellow
hi Title ctermfg=Black ctermbg=Yellow
" set variable 'g:os' according to development environment
if !exists('g:os')
if has('win32') || has('win16')
let g:os = 'Windows'
else
let g:os = substitute(system('uname'), '\n', '', '')
endif
endif
" a godsend that disables that stupidly annoying beep/bell once and for all
if g:os =~ 'CYGWIN'
set belloff=all
endif
" prevent ubuntu from outputting garbage characters
if g:os =~ 'Linux'
set t_RV=
endif
" make the clipboard the default register
if has('unnamedplus')
set clipboard=unnamed,unnamedplus
else
set clipboard=unnamed
endif
" ================================================================="
" ================================================================="
" =============== Begin my 'nnoremaps' vimrc things ==============="
" typing '' now also centers the screen
nnoremap '' ''zz
" map the jump-to-mark command 'm so that the
" command centers the screen upon jumping
nnoremap 'm 'mzz
"" press % to visually highlight in-between brace/bracket/parentheses
noremap % v%
" press CTRL-j/CTRL-k to go down/up half a page, respectively
noremap <C-j> <C-D>
noremap <C-k> <C-U>
" capital K enters a linefeed while maintaining normal mode
nnoremap K i<CR><ESC>
" use CTRL-h and CTRL-L to switch between Vim tabs
nnoremap <C-h> gT
inoremap <C-h> <ESC>gT
nnoremap <C-l> gt
inoremap <C-l> <ESC>gt
" use , to repeat the last find command --> use shift, to go the other way
nnoremap , ;
vnoremap , ;
nnoremap < ,
" remap the normal paste to align the pasted block with the surrounded text
nnoremap p ]p
nnoremap P ]P
" remap yb to not move the cursor backwards (repositioning the cursor was annoying)
nnoremap yb ybw
" remap CTRL-n to move to the next line that has a compile error"
nnoremap <C-n> :cn<CR>
" remap CTRL-p to move to the previous line that has a compile error"
" NOTE: can also map this to CTRL-N
nnoremap <C-p> :cp<CR>
" mappings for easily deleting the surrounding brackets/parentheses
" ==========================================================================================================
nnoremap <silent> <Plug>Map_df( dt(me%x`ex:silent! call repeat#set("\<plug>Map_df(", v:count)<cr>
nmap df( <Plug>Map_df(
nnoremap <silent> <Plug>Map_d( me%x`ex:silent! call repeat#set("\<Plug>Map_d(", v:count)<CR>
nmap d( <Plug>Map_d(`e
nnoremap <silent> <Plug>Map_df[ dt[me%x`ex:silent! call repeat#set("\<Plug>Map_df[", v:count)<CR>
nmap df[ <Plug>Map_df[`e
nnoremap <silent> <Plug>Map_d[ me%x`ex:silent! call repeat#set("\<Plug>Map_d[", v:count)<CR>
nmap d[ <Plug>Map_df[`e
" ==========================================================================================================
" mappings for easily changing the surrounding brackets/parentheses
" ==========================================================================================================
nnoremap <silent> <Plug>Map_cf( dt(me%x`exi:silent! call repeat#set("\<Plug>Map_cf(", v:count)<CR>
nmap cf( <Plug>Map_cf(`e
nnoremap <silent> <Plug>Map_c( %me%r(`er)%:silent! call repeat#set("\<Plug>Map_c(", v:count)<CR>
nmap c( <Plug>Map_c(`e
nnoremap <silent> <Plug>Map_cf[ dt[me%x`exi:silent! call repeat#set("\<Plug>Map_cf[", v:count)<CR>
nmap cf[ <Plug>Map_cf[`e
nnoremap <silent> <Plug>Map_c[ %me%r[`er]%:silent! call repeat#set("\<Plug>Map_c[", v:count)<CR>
nmap c[ <Plug>Map_c[`e
" ==========================================================================================================
" mappings for easily replacing the surrounding brackets/parentheses
" ==========================================================================================================
nnoremap <silent> <Plug>Map_r( %me%r(`er)%:silent! call repeat#set("\<Plug>Map_r(", v:count)<CR>
nmap r( <Plug>Map_r(`e
nnoremap <silent> <Plug>Map_r[ %me%r[`er]%:silent! call repeat#set("\<Plug>Map_r[", v:count)<CR>
nmap r[ <Plug>Map_r[`e
" ==========================================================================================================
" remap U to ~ for easier uppercasing/lowercasing
nnoremap U ~
" pressing Control-w then Control-c in split windows accidentally closes the window. I dislike this
nnoremap <C-w><C-c> <ESC>
" using 'x' will now put the 'cut' letter(s) in the black hole register "_
nnoremap x "_x
nnoremap X "_X
" using '' to will now put you at the (last cursor position) instead of the (last row your cursor was in)
nnoremap '' ``zz
" map Y to act the same as D & C
nnoremap Y y$
" ================================================================="
" ================================================================="
" =============== Begin my 'inoremaps' vimrc things ==============="
" autocomplete for matching brace (activated upon pressing enter)
if g:os =~ 'CYGWIN'
inoremap {<CR> {<TAB><CR>}<Esc><Esc>O
elseif g:os =~ 'Linux'
inoremap {<CR> {<CR>}<ESC>O
endif
" DUMBEST HACK EVER (but I'm so happy it works)
" normally pressing CTRL-c undoes your auto-indent on a blank line
" solutions to this is to make a new line that is auto-indented for you
" and then type some random character, delete it, then press CTRL-c
" so, that's exactly what this hack does
inoremap <C-c> l<BS><ESC>
" remap the paste function in insert mode to Control-p
inoremap <C-p> <C-R>*
" remap the autocomplete feature in vim to only look in the current file
inoremap <C-n> <C-x><C-n>
" remap the autocomplete feature for files to Control-m in insert mode
inoremap <C-k> <C-x><C-f>
" ================================================================="
" ================================================================="
" =============== Begin my 'vnoremaps' vimrc things ==============="
" easier uppercasing/lowercasing
vnoremap U ~
" so that your default register won't be overwritten when you paste over stuff in visual mode
xnoremap p "_dP
" ================================================================="
" ================================================================="
" ============== Begin some 'function' vimrc things ==============="
" now you can close the file, get back in, and still maintain the original undo tree
if has('persistent_undo')
set undolevels=5000
call system('mkdir ~/.vim/undo')
set undodir=~/.vim/undo
set undofile
endif
"=================================================================="
" toggle commented lines for #-style comments
function! ToggleComment_Py()
if matchstr(getline(line(".")),'^\s*\#.*$') == ''
:execute "s:^:# :"
else
:execute "s:^\s*# ::"
endif
endfunction
vnoremap ;# :call ToggleComment_Py()<CR>
nnoremap ;# :call ToggleComment_Py()<CR>
" toggle commented lines for "-style comments
function! ToggleComment_Vimrc()
if matchstr(getline(line(".")),'^\s*\".*$') == ''
:execute 's:^:" :'
else
:execute 's:^\s*" ::'
endif
endfunction
vnoremap ;" :call ToggleComment_Vimrc()<CR>
nnoremap ;" :call ToggleComment_Vimrc()<CR>
"=================================================================="
" reformat multiline if-statements into single line if-statements
fun! s:reformat(line1, line2)
" Remember line locs and numbers (bookkeeping)
execute 'normal!' 'me'
let l:before = line('$')
" Join the selected lines && put a newline before every 'else'
execute 'normal!' . (a:line2 - a:line1 + 1) . 'J'
execute 's/else/\relse/g'
" Recalculate the range && run Tabular
let l:line2 = a:line2 - (l:before - line('$'))
execute 'normal!' "V'e="
execute 'normal!' 'f(i '
execute a:line1 . ',' . l:line2 . 'Tabularize /{/'
endfun
command! -range Reformat :call s:reformat(<line1>, <line2>)
"=================================================================="
" unformat single line if-statements into multiline if-statements
fun! s:unformat(line1, line2)
" mark line one && keep track of lines selected
execute 'normal!' 'me'
let l:numDiff = a:line2 - a:line1 + 1
" delete extraneous white space
execute 'normal!' 'f dt(i '
let c = 0
while c < numDiff - 1
execute 'normal!' 'f)f dt{i '
execute 'normal!' 'j0w'
let c += 1
endwhile
execute 'normal!' 'f dt{i '
" Formatting to make the statements span multiple lines
execute 'normal!' "'e"
execute 'normal!' . (a:line2 - a:line1 + 1) . 'J'
execute 's/{ /{\r/g'
execute 'normal!' "'e"
let c = 0
while c < l:numDiff
execute 'normal!' 'j'
execute 's/}/\r}/g'
let c += 1
endwhile
execute 'normal!' "V'e="
endfun
command! -range Unformat :call s:unformat(<line1>, <line2>)
"=================================================================="
" a smarter delete operation (does not copy whitespace into registers)
" NOTE: this doesn't prevent copying whitespace using 'yy' or 'Vy'
" my assumption is that you wanted to copy the whitespace instead of deleting it
function! Smart_Delete_dd()
let temp = getreg('"', 1)
execute 'normal!' 'dd'
if matchstr(@", '\_s*') == @" " if just whitespace
call setreg('"', temp)
call setreg('*', temp)
call setreg('+', temp)
call setreg('0', temp)
endif
endfunction
nnoremap <silent> dd :call Smart_Delete_dd()<CR>
function! Smart_Delete_Vd() range
let temp = getreg('"', 1)
execute 'normal!' . (a:lastline - a:firstline + 1) . 'dd'
if matchstr(@", '\_s*') == @" " if just whitespace
call setreg('"', temp)
call setreg('*', temp)
call setreg('+', temp)
call setreg('0', temp)
endif
endfunction
vnoremap <silent> d :call Smart_Delete_Vd()<CR>
"=================================================================="
" insert the full path of the current file
fun! s:fullpath()
:put =expand('%:p')
endfun
command! FullPath :call s:fullpath()
" ================================================================="
" ================================================================="
" ================= Begin my custom ';' commands =================="
" use ;zf to fold all functions (in C and C++ and Java)
function! FoldFunctions()
:silent! execute "%g/^bool/normal! vf{%zf"
:silent! execute "%g/^boolean/normal! vf{%zf"
:silent! execute "%g/^int/normal! vf{%zf"
:silent! execute "%g/^double/normal! vf{%zf"
:silent! execute "%g/^void/normal! vf{%zf"
:silent! execute "%g/\tbool/normal! vf{%zf"
:silent! execute "%g/\tboolean/normal! vf{%zf"
:silent! execute "%g/\tint/normal! vf{%zf"
:silent! execute "%g/\tdouble/normal! vf{%zf"
:silent! execute "%g/\tvoid/normal! vf{%zf"
:silent! execute "%g/\tpublic/normal! vf{%zf"
:silent! execute "%g/\tprivate/normal! vf{%zf"
endfunc
nnoremap ;zf zE :call FoldFunctions()<CR><ESC>
" use ;n to toggle between number mode and relative number mode
function! NumberToggle()
if(&relativenumber == 1)
set nornu
set nonu
else
set rnu
set nu
endif
endfunc
nnoremap ;n :call NumberToggle()<CR>
set rnu
set nu
" use ;p to retain original indentation when pasting from another application
nnoremap ;p :set invpaste paste?<CR>
set showmode
" use ;w to remove trailing whitespace press ';w' (semicolon then 'w')
function! TrimWhitespace()
let l:save_cursor = getpos('.')
%s/\s\+$//e
call setpos('.', l:save_cursor)
endfunction
nnoremap ;w :call TrimWhitespace()<CR>
" use ;h to toggle highlighted search
nnoremap ;h :set hlsearch! hlsearch?<CR>
" use ;l to reload the file
nnoremap ;l :e<CR>
" use ;t and type a file name to open it in a VIM tab (:tabnew)
nnoremap ;t :tabnew
" use ;m to run the Makefile in the current directory (:make)
nnoremap ;m :make<CR>
" use ;s to source the vimrc file
nnoremap ;s :source $VIM/vimrc<CR>
" use ;f to format the file according to C++/Java style
nnoremap ;f :set expandtab! expandtab?<CR>gg=G''<ESC>
" use ;d to put deleted stuff in the black hole register "_
nnoremap ;d "_dd
vnoremap ;d "_d
" use ;j to jump from a function call to that function's definition
" use T to pop from the tag stack and go to that location
" use in conjuction with ctags
nnoremap ;j <C-]>zz
nnoremap T <C-t>zz
" use ;y to copy the current text file into the clipboard
nnoremap ;y myggvG$"*y'y
" use ;v to paste from the clipboard
nnoremap ;v "*p
" use ;zf to easily fold code that lies in between the braces
" v%zf<CR>
" use ;r in visual mode to replace the visually selected word
nnoremap ;r ye:%s/<C-F>pa//g<ESC>F/i
vnoremap ;r y:%s/<C-F>pa//g<ESC>F/i
" ================================================================="
" ================================================================="
" ================== Some nice things to remember ================="
" restore color scheme --> this is not actually mapped to something
" set filetype=____ (e.g. :set filetype=cpp)
" zipping files
" zip -r file_name.zip *
" specific things for filetypes --> actually don't do this --> see ~/.vim/after/ftplugin/
" au FileType python
" Don't wake up system with blinking cursor:
" http://www.linuxpowertop.org/known.php
let &guicursor = &guicursor . ",a:blinkon0"